Creation Music Company

Looking to add lightweight wheels and a pull out handle to your flight case? Our trolley system is the perfect solution. The brackets attach to the lid of your case and the trolley can easily clip on and off. This helps keep the weight of your case down for flying as you can remove the added weight of heavy corner casters and easily store the trolley in your carry on as well as make the case lighter as a whole by not having to make it as large to fit wheels and a handle on the inside (a bigger case)

For our Blackout Series Case, you already have the holes and T Nuts installed. You just have to install with a screw driver.

When sold by itself for you to install with your existing case, we include screws and T-Nuts for the back side (note, that the T-Nuts go on the INSIDE of the case, so your foam may need to be removed and replaced after installation)

Our Blackout Series Flight Cases have all the strength and protection you'd expect from a Creation flight case, but with added improvements and aesthetics. We utilize top quality hardware, extrusion, and plywood, and made it with a unique hex pattern coated plywood panel for incredible strength. Then, we had all the aluminum and hardware customized in a black powder coat for a look that is sure to turn heads.

Added improvements are an included 2.5 EVA foam block riser included with every case. This allows the case to be used for multiple heights of angled board or flat pedalboards simply by using or removing the foam blocks. We also had every case pre-drilled with hardware added before the foam lining is glued in so that a trolley can be easily added to any case by us with your order, or added later on. All you need is a screw driver to remove the placeholder screws, align the brackets, and install the longer screws. Then the trolley can clip on/off with ease for easier transport.

Features

• Powder coated black aluminum extrusion construction
  
• Powder coated black hardware
• 1/4" Coated hex pattern plywood construction
• Up to 40% lighter than other mass produced cases
• Oversized ball corner reinforcements
• Spring Loaded Heavy Duty Handle on top and one side
• Recessed butterfly latches
• Pre-configured  threaded holes to add removable trolley
• 1/2 inch EVA foam sides and bottom
• 2-1/2 inch EVA foam blocks for multiple height options
• 2-1/4 Inch convoluted lid foam for maximum pedal compression

Dimensions:

Size 24x16 - 24.5 x 16.5 x 5.25 inches foam to foam (lid compresses for 6.25 inches of maximum clearance)

Weight:

Size 24x16 - Approximately 18 lbs

Our Blackout Series Flight Cases have all the strength and protection you'd expect from a Creation flight case, but with added improvements and aesthetics. We utilize top quality hardware, extrusion, and plywood, and made it with a unique hex pattern coated plywood panel for incredible strength. Then, we had all the aluminum and hardware customized in a black powder coat for a look that is sure to turn heads.

Added improvements are an included 2.5 EVA foam block riser included with every case. This allows the case to be used for multiple heights of angled board or flat pedalboards simply by using or removing the foam blocks. We also had every case pre-drilled with hardware added before the foam lining is glued in so that a trolley can be easily added to any case by us with your order, or added later on. All you need is a screw driver to remove the placeholder screws, align the brackets, and install the longer screws. Then the trolley can clip on/off with ease for easier transport.

Features

• Powder coated black aluminum extrusion construction
  
• Powder coated black hardware
• 1/4" Coated hex pattern plywood construction
• Up to 40% lighter than other mass produced cases
• Oversized ball corner reinforcements
• Spring Loaded Heavy Duty Handle on top and one side
• Recessed butterfly latches
• Pre-configured  threaded holes to add removable trolley
• 1/2 inch EVA foam sides and bottom
• 2-1/2 inch EVA foam blocks for multiple height options
• 2-1/4 Inch convoluted lid foam for maximum pedal compression

Dimensions:

Size 24x12.5 - 24.5 x 13 x 5.25 inches foam to foam (lid compresses for 6.25 inches of maximum clearance

Weight:

Size 24x12.5 - Approximately 16 lbs

Our Power unit is the perfect way to integrate a power connection right to your pedalboard and also incorporate a dedicated on/off switch.

We start with a top quality IEC male connector and solder a 22 inch straight female lead onto it and cover the solder connections with an insulated cover. Simply remove the small cover plate and screw to your Elevation V2 outer plate with the required hardware.

Power Features:

• IEC Connection 
• On/Off switch
• 22" straight connector lead

Our Power unit is the perfect way to integrate a power connection right to your pedalboard and also incorporate a dedicated on/off switch.

We start with a top quality IEC male connector and solder a 22 inch straight female lead onto it and cover the solder connections with an insulated cover. Simply remove the small cover plate and screw to your Elevation V2 outer plate with the required hardware.

Power Features:

• IEC Connection 
• On/Off switch
• 22" straight connector lead

Our patch bay makes adding I/O capability simple and easy. Each unit houses 4 TRS passthroughs. By using TRS this opens the door for those that want to use various splitter cables, or use an adapter cable for XLR connections.

These connections are housed in a proprietary aluminum enclosure with threaded holes. These perfectly align with the pre-installed outer plate of our Elevation Series V2 and allow you to install from the exterior of your board with 4 screws. 

Patch Bay Features:

• 4 TRS Passthroughs (In or Out)
• Aluminum enclosure
• Mounting hardware included

A design years in the making.

In 2016 we released The Elevation Series. It received accolades from touring pros to weekend warriors all around the globe, and for good reason. Its unibody design was incredibly strong and self-supportive, yet extremely lightweight. Its hand crafted end panels were classy, but subtle. But over the years, we've been quietly working on some big improvements and we think we've done just that.

Modular.

In 2017, with the release of our Pro Elevation Series, we introduced a simple patch box and also incorporated that method into our Custom Shop models as well. Every box was drilled and laser etched for each order. We quickly realized that a modular system would streamline this process.

When designing our modular system, we wanted to make ours aesthetically pleasing as well as ruggedly durable. All Elevation Series V2 boards come with 1 outer plate for mounting modules and 2 inner cover plates on each end. Simply remove the cover plate and install one of our proprietary modules. We believe this is the cleanest and most durable way to offer a modular system. 

Slots.

In 2018 we released the Aero Series with a very carefully laid out slot pattern and multiple handle holes. We pulled heavily on our years of experience building rigs for touring pros with extreme cable management. We wanted to mimic this capability on the Elevation V2. There are plenty of openings for cable management, but not so many to get in the way of mounting pedals.

An added bonus is this makes the weight of the frame go down even more. It's not dramatic, but it may just save you from having to remove a pedal when you check it with the airline.

Strength.

As mentioned above, the Elevation has always been praised for its strength while remaining incredibly lightweight. This hasn't changed. It's only gotten better. By adding removable vertical braces on the larger sizes (24x12.5, 24x16, 32x16) they are more solid than ever. 

Quality.

Finally, with our Elevation V2, we wanted to maintain the quality that has become synonymous with the Creation Music brand. All aluminum parts are made from 5052 aircraft grade aluminum. Our powder coat is rock solid and done by a local company we're proud to partner with. Our wooden ends are top grade American Black Walnut and are finished by hand.  

Dimensions: 24" x 16" 

Total Width: 17” (with end panels) 16” unibody alone

Height: 3 7/8" Heel and 2 1/8" Toe

Finish: Powder Coated with American Black Walnut ends with Laser Engraved Badge

Weight: 4lbs

Inclination: Slant 

Case: Not Included 

Board Candy: 3ft 1" Hook and Loop, 20 x 4 inch zip ties, 8 x 3/4" Self Adhesive Cable Mounts. 4 x 1" Self Adhesive Cable Mounts

A design years in the making.

In 2016 we released The Elevation Series. It received accolades from touring pros to weekend warriors all around the globe, and for good reason. Its unibody design was incredibly strong and self-supportive, yet extremely lightweight. Its hand crafted end panels were classy, but subtle. But over the years, we've been quietly working on some big improvements and we think we've done just that.

Modular.

In 2017, with the release of our Pro Elevation Series, we introduced a simple patch box and also incorporated that method into our Custom Shop models as well. Every box was drilled and laser etched for each order. We quickly realized that a modular system would streamline this process.

When designing our modular system, we wanted to make ours aesthetically pleasing as well as ruggedly durable. All Elevation Series V2 boards come with 1 outer plate for mounting modules and 2 inner cover plates on each end. Simply remove the cover plate and install one of our proprietary modules. We believe this is the cleanest and most durable way to offer a modular system. 

Slots.

In 2018 we released the Aero Series with a very carefully laid out slot pattern and multiple handle holes. We pulled heavily on our years of experience building rigs for touring pros with extreme cable management. We wanted to mimic this capability on the Elevation V2. There are plenty of openings for cable management, but not so many to get in the way of mounting pedals.

An added bonus is this makes the weight of the frame go down even more. It's not dramatic, but it may just save you from having to remove a pedal when you check it with the airline.

Strength.

As mentioned above, the Elevation has always been praised for its strength while remaining incredibly lightweight. This hasn't changed. It's only gotten better. By adding removable vertical braces on the larger sizes (24x12.5, 24x16, 32x16) they are more solid than ever. 

Quality.

Finally, with our Elevation V2, we wanted to maintain the quality that has become synonymous with the Creation Music brand. All aluminum parts are made from 5052 aircraft grade aluminum. Our powder coat is rock solid and done by a local company we're proud to partner with. Our wooden ends are top grade American Black Walnut and are finished by hand.  

Dimensions: 24" x 12.5" 

Total Width: 17” (with end panels) 16” unibody alone

Height: 3 7/8" Heel and 2 1/8" Toe

Finish: Powder Coated with American Black Walnut ends with Laser Engraved Badge

Weight: 4lbs

Inclination: Slant 

Case: Not Included 

Board Candy: 3ft 1" Hook and Loop, 20 x 4 inch zip ties, 8 x 3/4" Self Adhesive Cable Mounts. 4 x 1" Self Adhesive Cable Mounts

A design years in the making.

In 2016 we released The Elevation Series. It received accolades from touring pros to weekend warriors all around the globe, and for good reason. Its unibody design was incredibly strong and self-supportive, yet extremely lightweight. Its hand crafted end panels were classy, but subtle. But over the years, we've been quietly working on some big improvements and we think we've done just that.

Modular.

In 2017, with the release of our Pro Elevation Series, we introduced a simple patch box and also incorporated that method into our Custom Shop models as well. Every box was drilled and laser etched for each order. We quickly realized that a modular system would streamline this process.

When designing our modular system, we wanted to make ours aesthetically pleasing as well as ruggedly durable. All Elevation Series V2 boards come with 1 outer plate for mounting modules and 2 inner cover plates on each end. Simply remove the cover plate and install one of our proprietary modules. We believe this is the cleanest and most durable way to offer a modular system. 

Slots.

In 2018 we released the Aero Series with a very carefully laid out slot pattern and multiple handle holes. We pulled heavily on our years of experience building rigs for touring pros with extreme cable management. We wanted to mimic this capability on the Elevation V2. There are plenty of openings for cable management, but not so many to get in the way of mounting pedals.

An added bonus is this makes the weight of the frame go down even more. It's not dramatic, but it may just save you from having to remove a pedal when you check it with the airline.

Strength.

As mentioned above, the Elevation has always been praised for its strength while remaining incredibly lightweight. This hasn't changed. It's only gotten better. By adding removable vertical braces on the larger sizes (24x12.5, 24x16, 32x16) they are more solid than ever. 

Quality.

Finally, with our Elevation V2, we wanted to maintain the quality that has become synonymous with the Creation Music brand. All aluminum parts are made from 5052 aircraft grade aluminum. Our powder coat is rock solid and done by a local company we're proud to partner with. Our wooden ends are top grade American Black Walnut and are finished by hand.  

Dimensions: 17" x 12.5" 

Total Width: 17” (with end panels) 16” unibody alone

Height: 3 7/8" Heel and 2 1/8" Toe

Finish: Powder Coated with American Black Walnut ends with Laser Engraved Badge

Weight: 4lbs

Inclination: Slant 

Case: Not Included 

Board Candy: 3ft 1" Hook and Loop, 20 x 4 inch zip ties, 8 x 3/4" Self Adhesive Cable Mounts. 4 x 1" Self Adhesive Cable Mounts

The Blackout Flat Series is our answer to musicians searching for a simple and effective pedalboard while still having the quality and touch of class people have come to expect from Creation Music Company.

The Flat Series is not like most flat pedalboards. While it is a simple design, the materials chosen and execution are what sets it apart. We use a specially coated 3/8" plywood so that pedals stick exceptionally well versus an ABS Lamination with a texture. This is also extremely strong and light weight. We also chose to offset the handles for better balance when lifting the board (18x7 excluded). Finally, for that added class, our logo is laser engraved on the top.

Dimensions: 24" x 16"

Finish: Coated Ply (Smooth Top with a Textured Underside) with Laser Engraved Loga and Black Aluminum Trim Edge

Weight: 1.23 Lbs.

Inclination: Flat

Case: Not Included 

Board Candy: 3ft 1" Hook and Loop, 20 x 4 inch zip ties, 8 x 3/4" Self Adhesive Cable Mounts. 4 x 1" Self Adhesive Cable Mounts

The Blackout Flat Series is our answer to musicians searching for a simple and effective pedalboard while still having the quality and touch of class people have come to expect from Creation Music Company.

The Flat Series is not like most flat pedalboards. While it is a simple design, the materials chosen and execution are what sets it apart. We use a specially coated 3/8" plywood so that pedals stick exceptionally well versus an ABS Lamination with a texture. This is also extremely strong and light weight. We also chose to offset the handles for better balance when lifting the board (18x7 excluded). Finally, for that added class, our logo is laser engraved on the top.

Dimensions: 24" x 12.5"

Finish: Coated Ply (Smooth Top with a Textured Underside) with Laser Engraved Loga and Black Aluminum Trim Edge

Weight: 1.23 Lbs.

Inclination: Flat

Case: Not Included 

Board Candy: 3ft 1" Hook and Loop, 20 x 4 inch zip ties, 8 x 3/4" Self Adhesive Cable Mounts. 4 x 1" Self Adhesive Cable Mounts

The Blackout Flat Series is our answer to musicians searching for a simple and effective pedalboard while still having the quality and touch of class people have come to expect from Creation Music Company.

The Flat Series is not like most flat pedalboards. While it is a simple design, the materials chosen and execution are what sets it apart. We use a specially coated 3/8" plywood so that pedals stick exceptionally well versus an ABS Lamination with a texture. This is also extremely strong and light weight. We also chose to offset the handles for better balance when lifting the board (18x7 excluded). Finally, for that added class, our logo is laser engraved on the top.

Dimensions: 18" x 12.5"

Finish: Coated Ply (Smooth Top with a Textured Underside) with Laser Engraved Loga and Black Aluminum Trim Edge

Weight: 1.23 Lbs.

Inclination: Flat

Case: Not Included 

Board Candy: 3ft 1" Hook and Loop, 20 x 4 inch zip ties, 8 x 3/4" Self Adhesive Cable Mounts. 4 x 1" Self Adhesive Cable Mounts