Strymon BigSky Reverberator

$ 479.00

Clear Skies Ahead.

Plug into BigSky and instantly lift your sound into the stratosphere. The world below you fades into the distance, and you're elevated into a glow of lush, glorious, radiant reverbs.

To create a reverb experience as natural, beautiful, and immersive as BigSky required tremendous feats of sound engineering and artistic imagination. Using the fundamentals of acoustical science as our beacon, we carefully studied and scientifically analyzed reverb technology from the past fifty years. We faithfully captured the essence of these classic sounds, and forged ahead to dream up our vision of reverbs from the future.

Go Where No Reverbs Have Gone Before.

Feel the mechanical tension of the Spring reverbs. Hear the floating particles of the Cloud machine. Defy the laws of physics with the Nonlinear reverbs. Unleash the multi-head reverberations of the Magneto machine. BigSky gives you twelve studio-class reverb machines, each with simple yet powerful controls.

We knew we must take reverb to a whole new level. With careful attention to detail, innovative analog circuitry design, an insanely powerful SHARC processor, and the utilization of top-shelf components, we've developed a reverb pedal that fits on your pedal board yet has better audio quality than many rack reverb units. This fusion of science with art has just one goal. To provide you with the most musically inspirational reverb experiences possible.

Sound Design

Hand crafted, studio-class reverb algorithms deliver lush, gorgeous, and musically inspiring reverb experiences
Twelve reverb machines to choose from: Room, Hall, Plate, Spring, Swell, Bloom, Cloud, Chorale, Shimmer, Magneto, Nonlinear, Reflections
Seven front-panel tone shaping knobs: Decay, Pre-Delay, Mix, Tone, Mod, Param 1, Param 2 (Param knobs assignable per preset)
Additional menu parameters allow for easy customization of reverb sounds
300 easily accessible and namable presets
Press-and-hold Infinite Sustain and Freeze functions, saveable per preset
Spillover and Reverb Persist modes, saveable per preset
Selectable Speaker Cabinet emulation for direct-to-PA gigs or recording applications

Hardware

Three rugged metal footswitches for preset selection and effect bypass
LED display for preset info, reverb decay time, and extended parameter control
Multi-color preset LEDs (green for active preset, amber for edited preset)
Full MIDI implementation allows extended control for those with more complex rigs
Sturdy and lightweight light blue anodized aluminum chassis, with laser-etched artwork
Durable black anodized aluminum knobs
Studio-grade audio input and output jacks

Ins & Outs

Stereo input and output
Expression pedal input with selectable control over any knob or combination of knobs, saveable per preset (also configurable as external tap input)
MIDI input and output
Included 9V center-negative power supply (300mA minimum required)

Audio Quality

Analog dry path for a zero latency dry signal that is never converted to digital
Premium analog front end and output section
Ultra low noise, high performance 24-bit 96kHz A/D and D/A converters
115dB typical signal to noise at 50% wet mix (120db at 100% dry mix, 109dB at 100% wet mix)
20Hz to 20kHz frequency response
+8dBu maximum input level easily handles instrument and line signals

Processor

Super high performance DSP in a compact form factor
32-bit floating point processing
333MHz SIMD SHARC processor core, capable of 2.4 Gigaflops peak performance

More

True Bypass (electromechanical relay switching)
High quality, tranparent Analog Buffered Bypass mode
+/- 3dB Boost/Cut, saveable per preset
Optional Kill Dry mode mutes dry signal, for use in parallel effects loops
Dimensions: 6.75" (171mm) wide, 5.1" (130mm) deep
Designed and Built in the USA

Lark Guitars Difference: Lark Guitars takes great pride in making sure your shipment will arrive timely, correctly and as hassle free as possible. With the massive shift to more remote ordering of guitars and instruments, this process can be exasperating at times. It is our goal to minimize any of these feelings, making your transaction from purchase to playing as joyfully possible. For more info regarding our shipping methods, please visit here.

International Shipping:

We ship all over the world, please contact us with any questions you may have or to receive a detailed shipping quote! More info here.

Strymon TimeLine Delay

$ 449.00

NOW IN STOCK! To purchase, please contact us:

info@larkguitars.com
210-384-4303

Product Description

Inspiration Machine.

When we decided to create a studio-class stereo delay effects pedal, we knew we must go well beyond what has been done in the past—in sound quality, sonic flexibility, hardware design, and processing power. We spent months locked up in the Strymon sound design labs with an intense focus on dreaming up the most spacious, lush, creative, and tweakable delay effects ever heard. It was a monumental task—a relentless study of delays and their nuances, and a continuous pursuit of innovative and musically inspirational sounds. Utilizing a ridiculously powerful SHARC DSP, every drop of processing power is harnessed. Each algorithm is so detailed it requires the entire processor.

TimeLine provides you with twelve different delay machines, each with extensive control over sonic character and feel. Tweak to your hearts content and save up to 200 presets of your favorite sounds. Go from crisp and clear, studio-quality digital delays all the way to the saturated and fluctuating sounds of tape delay machines. Get warm and fuzzy analog style repeats all the way to shimmery, sparkling, and crystalline ice delays. Top it all off with full MIDIimplementation and a routable, 30-second stereo looper and you’re on your way to delay bliss.

Sound Design

Hand crafted, studio-class delay algorithms deliver meticulous, detailed and nuanced delay experiences
Twelve delay machines to choose from: Digital, Dual, Pattern, Reverse, Ice, Duck, Swell, Trem, Filter, Lo-fi, dTape™, dBucket™.
Seven front-panel tone shaping knobs: Time, Repeats, Mix, Filter, Grit, Mod Speed, Mod Depth
Additional menu-driven parameters deliver extremely flexible tone shaping options and complete tweakability
200 easily accessible and nameable presets, save and recall at the press of a switch

Hardware

Three rugged metal footswitches for preset selection, effect bypass, looper control, and Tap Tempo
LED display for preset info, BPM/time readout, and extended parameter control
Full MIDI implementation allows extended control for those with more complex rigs
30-second stereo Looper, routable pre- or post-delay, with MIDI capability.

Ins & Outs

Stereo input and output
Expression pedal input with selectable control over knob or combination of knobs, saveable per preset (also configurable as external tap input)
MIDI input and output
Switchable I/O configuration: Stereo Out or Mono with Delay Feedback Loop Insert

Audio Quality

Ultra low noise, high performance 24-bit 96kHz A/D and D/A converters
115dB typical signal to noise
Analog dry path for a zero latency dry signal that is never converted to digital
Premium analog front end and output section
Super high performance DSP in a compact form factor
32-bit floating point processing

More

True Bypass (electromechanical relay switching)
Selectable Trails mode with high quality, transparent Analog Buffered Bypass, saveable per preset
+/- 3dB Boost/Cut, saveable per preset
Selectable Tap Subdivision, saveable per preset
Optional Kill Dry mode mutes dry signal, for use in parallel effects loops
Optional Global Tap Tempo mode
Included 9V DC power supply (300mA required minimum)
Rugged and lightweight gunmetal gray anodized aluminum chassis
Dimensions: 6.75" wide, 5.1" deep
Crafted with love in the USA

Lark Guitars Difference: Lark Guitars takes great pride in making sure your shipment will arrive timely, correctly and as hassle free as possible. With the massive shift to more remote ordering of guitars and instruments, this process can be exasperating at times. It is our goal to minimize any of these feelings, making your transaction from purchase to playing as joyfully possible. For more info regarding our shipping methods, please visit here.

International Shipping:

We ship all over the world, please contact us with any questions you may have or to receive a detailed shipping quote! More info here.

Strymon Mobius Modulation

$ 449.00

NOW IN STOCK! To purchase, please contact us:

info@larkguitars.com
210-384-4303

Product Description

Infinitely Organic.

Some might say we're driven. When our engineers lock themselves in our sound design labs for months on end, you might say we're obsessed. We have been dedicating ourselves to forging a collection of the most organic, luscious, expressive, and versatile modulation effects ever heard. It was an enormous mission—we painstakingly studied the nuances of the legendary modulations from the last five decades. We didn't stop at faithfully capturing these warm and lush vintage sounds—we expanded their vocabulary with extended versatility and sonic possibilities never before heard.

Mobius gives you twelve legendary, versatile, and inspirational modulation machines, all in an easy-to-use package. Go from lush, mouthwatering, vintage chorus sounds all the way to syrupy psychedelic phasers. Get classic, pulsating tremolos all the way to warbling crushed bits. Mobius opens up the history books of music and provides new sounds and inspiration for all of your musical ideas.

We knew we must surpass what has been done—in sound design, audio quality, hardware design, and processing power. Utilizing an insanely powerful SHARC DSP, every drop of power is harnessed. Top it all off with 200 presets, full MIDI implementation and a unique Pre/Post Mode and you're on your way to modulation ecstasy.

Sound Design

Studio-class modulation algorithms deliver meticulous and detailed modulation experiences
Twelve modulation machines to choose from: Chorus, Flanger, Rotary, Vibe, Phaser, Filter, Formant, Vintage Trem, Pattern Trem, Autoswell, Destroyer, Quadrature
Five front-panel tone shaping knobs: Speed, Depth, Level, Param 1, Param 2 (Param knobs assignable per preset)
Additional menu-driven parameters deliver extremely flexible tone shaping options and versatility
200 easily accessible and nameable presets, save and recall at the press of a switch

Hardware

Three rugged metal footswitches for preset selection, effect bypass, and Tap
LED display for preset info, BPM readout, and extended parameter control
Full MIDI implementation allows extended control for those with more complex rigs
Sturdy and lightweight dark blue anodized aluminum chassis

Ins & Outs

Stereo input and output
Expression pedal input with selectable control over any knob or combination of knobs, saveable per preset (also configurable as external tap input)
MIDI input and output
Pre/Post Mode for flexible routing, allowing you to put Mobius in two different places in your mono signal chain

Audio Quality

Ultra low noise, high performance 24-bit 96kHz A/D and D/A converters
110dB typical signal to noise
20Hz to 20kHz frequency response
+8dBu maximum input level easily handles instrument and line signals
Premium analog front end and output section
Super high performance DSP in a compact form factor
32-bit floating point processing

More

True Bypass (electromechanical relay switching)
Selectable high-quality Analog Buffered Bypass
Selectable Tap Subdivision, saveable per preset
Optional Global Tap Tempo mode
Included 9V DC power supply (300mA required minimum)
Dimensions: 6.75" wide, 5.1" deep
Designed and Built in the USA

Lark Guitars Difference: Lark Guitars takes great pride in making sure your shipment will arrive timely, correctly and as hassle free as possible. With the massive shift to more remote ordering of guitars and instruments, this process can be exasperating at times. It is our goal to minimize any of these feelings, making your transaction from purchase to playing as joyfully possible. For more info regarding our shipping methods, please visit here.

International Shipping:

We ship all over the world, please contact us with any questions you may have or to receive a detailed shipping quote! More info here.

Strymon NightSky - In Stock

$ 429.00

Time-Warped Reverberator.

Name: Strymon BigSky Reverberator
Brand: Strymon
SKU: S-BIGSKY
Price: 479.0 USD
Availability: InStock

Create vast soundscapes with just a few notes from your instrument. Apply mind-bending pitch and harmonic manipulation to your reverb tails, with synth-like filter sweeps. Enter a world of new sounds that blow away the boundaries of what is possible with reverb. With pioneers and adventurous sonic explorers in mind we created a reverb pedal that can go where none have gone before.

Reverberant Synthesis Machine.

NightSky is a reverberant synthesis workstation, and a powerful, hands-on experimental sound design platform. NightSky gives you real-time continuous control of reverb pitch/processing rate/core size, harmonics, and even a synth-like resonant filter with multiple modulation waveshapes, plus a step sequencer with variable glide. You haven’t heard a pedal like this before.

The Rules of Space and Time Have Been Rewritten.

New Sonic Territory.

NightSky is a reverb pedal you will want to get your hands on. Deep and powerful sound manipulation with instant response knob-tweaking and no menu diving set a new standard in experimental reverb sound design.

Warp Core Reverb.

NightSky achieves some of its most mind bending sounds by using a Variable Process Rate for its reverb core, allowing you to simultaneously change the size of the reverb as well as the pitch. This pitch change can be completely smooth, or quantized to a variety of musical scales. And it can be sequenced.

Harmonic Sculpture Machine.

Use Shimmer to shift the harmonic structure by selectable musical intervals. Add Glimmer to dynamically enhance the harmonic spectrum. Turn up Drive to generate saturated overdriven harmonics. Then sculpt the resulting signal with NightSky’s synth-like variable-resonance low pass filter.

Three selectable reverb types offer a wide variety of ambient textures

MOD section with various waveforms to modulate the reverb or tone filters

TONE section to sculpt the high and low EQ of the reverb

VOICE section to enhance the aural spectrum of the reverb

Adjustable SHIMMER for adding pitch shifting of up to +/- 1 octave to the reverb

GLIMMER dynamically enhances high or low frequency harmonics for synth-like textures

Pre or Post DRIVE to add saturated overdriven harmonics to the reverb

Adjustable reverb core size to increase or decrease the space for reflections

Independent REVERB and DRY level controls

Step sequencer for programming rhythmic pitch variations of the reverb

Access to 16 presets from the front panel and 300 presets via MIDI

Lark Guitars Difference: Lark Guitars takes great pride in making sure your shipment will arrive timely, correctly and as hassle free as possible. With the massive shift to more remote ordering of guitars and instruments, this process can be exasperating at times. It is our goal to minimize any of these feelings, making your transaction from purchase to playing as joyfully possible. For more info regarding our shipping methods, please visit here.

International Shipping:

We ship all over the world, please contact us with any questions you may have or to receive a detailed shipping quote! More info here.

Strymon Iridium Amp & IR Cab

$ 399.00

IN-STOCK and READY TO SHIP

info@larkguitars.com
210-384-4303

Three Iconic Amplifiers

Our Matrix Modeling™ process captures all the subtleties and unique tonal qualities of each amplifier. We’ve taken three iconic tube amps with distinct characters and mathematically modeled every aspect of their circuitry with absolute precision to deliver the response, feel, and inspiring experience of playing through the original amps at their best. Taking the process a step further, we’ve hot-rodded each amp to provide an extended range of tonal options beyond what was available from the original designs.

Round Amp - Based on* a Fender® Deluxe Reverb

Chime Amp Based on* the Brilliant channel of a Vox® AC30TB

Punch Amp Based on* a Marshall® Plexi (Super Lead model number 1959)

Nine Stereo IR Cabinets

Iridium’s speaker cabinets offer a level of realism and responsiveness unprecedented in outboard effects. Iridium delivers full stereo 24bit 96kHz resolution for the entire 500 milliseconds of its speaker cabinet impulse responses. Until now, IRs of this resolution have only been available for use within studio recording software. Iridium’s breakthrough technology means you can use the very best impulse responses available, bringing maximum realism to your pedalboard.

Adjustable Room Ambience

Iridium’s hybrid room reverb combines a 256 millisecond stereo impulse response with Strymon’s reverb tank algorithm for extended decay. This combination places your amp and cab in a natural sounding room (small, medium, or large), creating a space for your amp to open up and breathe.

Nine Stunningly Realistic Cabs.

Iridium comes pre-loaded with a carefully curated collection of premium cabinet IRs from OwnHammer, Celestion, cabIR and Valhallir. You can also load your own IRs using Strymon Impulse Manager software.

Deluxe Reverb® 1×12″ by OwnHammer
Impulse of a vintage Fender® Deluxe Reverb 1×12″ open back combo with a 1978 Fender CTS ceramic 12″ speaker.

Blues Junior® 1×12″ by cabIR
Impulse of a 1×12″ Blues Junior cabinet with a Jensen® C12N speaker.

Vibrolux® 2×10″ by cabIR
Impulse of a 1965 Fender Vibrolux 2×10″ with Jensen C10NS speakers.

AC30 2×12″ AlNiCo by OwnHammer
Impulse of a Vox® AC30/6 open back 2×12″ combo with 2001 Celestion® T0530 Blue AlNiCo speakers.

1×12″ AlNiCo by Celestion
Impulse of a Celestion Blue AlNiCo speaker in a closed back 1×12″ cab.

Mesa® 4×12″ by Valhallir
Impulse of a 4×12″ Mesa Boogie halfback with two Celestion Black Shadow® MC-90 and two ElectroVoice® Black Shadow EVM12-L speakers.

GNR 4×12″ by OwnHammer
Impulse of a 1971 Marshall® 1960B “basketweave” 4×12″ cabinet with 1971 Celestion T1221 G12M-25 speakers.

2×12″ Vintage 30 by Celestion
Impulse of a Celestion Vintage 30 in an open back 2×12″ cab.

Marshall 8×12″ AlNiCo by cabIR
Impulse of a 1965 Marshall 8×12″ re-issue full stack cabinet, with Celestion T652 AlNiCo speakers.

Lark Guitars Difference: Lark Guitars takes great pride in making sure your shipment will arrive timely, correctly and as hassle free as possible. With the massive shift to more remote ordering of guitars and instruments, this process can be exasperating at times. It is our goal to minimize any of these feelings, making your transaction from purchase to playing as joyfully possible. For more info regarding our shipping methods, please visit here.

International Shipping:

We ship all over the world, please contact us with any questions you may have or to receive a detailed shipping quote! More info here.

Strymon Volante Magnetic Echo

$ 399.00

Sound Design

Multi-head magnetic media delay machine providing four playback heads with individual feedback, panning, and level controls
Processor-intense algorithms deliver meticulously nuanced recreations of vintage magnetic echo systems (drum echo, tape echo, studio reel-to-reel echo)
Dedicated control over echo machine tone and media: Low Cut, Mechanics, Wear
Input Record Level for clean reproduction to warm, fat saturation
Independent Spring Reverb
Sound on Sound looping mode with reverse, pause, splice, and infinite repeat functions

Ins, Outs, Switches

High impedance stereo input
Stereo output
Input Level switch allows for both instrument and line level signals
On, Favorite, and Tap Tempo footswitches
Expression pedal input allows the connection of an expression pedal, external tap pedal, 1/4" to MIDI cable, or MultiSwitch Plus.
Full featured MIDI in/out supporting MIDI CCs, program changes, and more
USB jack for controlling MIDI via computer

Audio Quality

Analog dry path for a zero latency dry signal that is never converted to digital
Premium JFET analog front end
Ultra low noise, high performance 24-bit 96kHz A/D and D/A converters provide uncompromising audio quality
Super high performance SHARC DSP
32-bit floating point processing
20Hz to 20kHz frequency response
Audio Input Impedance: 1M Ohm
Audio Output Impedance: 100 Ohm

More

True Bypass (electromechanical relay switching) or selectable transparent Analog Buffered Bypass
Strong and lightweight anodized olive green aluminum chassis
9V DC power supply included
Power requirements: maximum 9 volts DC center-negative, with a minimum of 300mA of current
Dimensions: 4.5" deep x 7" wide x 1.75" tall (114.3 mm x 177.3 mm x 44.5 mm)
Designed and built in the USA

Lark Guitars Difference: Lark Guitars takes great pride in making sure your shipment will arrive timely, correctly and as hassle free as possible. With the massive shift to more remote ordering of guitars and instruments, this process can be exasperating at times. It is our goal to minimize any of these feelings, making your transaction from purchase to playing as joyfully possible. For more info regarding our shipping methods, please visit here.

International Shipping:

We ship all over the world, please contact us with any questions you may have or to receive a detailed shipping quote! More info here.

Strymon Ola dBucket Chorus & Vibrato

$ 299.00

Product Description

Certified Organic.

In designing the Ola dBucket Chorus and Vibrato, we started with the dBucket building blocks and used them to craft a beautiful and versatile modulation effect. Keeping in line with the same philosophy as our Brigadier delay, our high performance DSP is entirely dedicated to and focused on providing the most lush and organic chorus and vibrato sounds available. We also drew influence from some of our favorite vintage chorus effects and a certain little blue box vibrato with a strong cult following. On top of that we threw in true bypass, a favorite preset, stereo input and output, and a super high quality analog front end and output section.

Hand crafted dBucket algorithm for highly accurate reproduction of every stage of an analog bucket brigade chip. Built on the dBucket building blocks developed for our Brigadier delay.
Super low noise, high performance A/D and D/A converters w/ 110dB signal to noise
High performance DSP stuffed into a compact form factor
3 modulation types (chorus, muti-mode chorus, vibrato)
3 dynamic modes (normal, ramp, envelope)
Controllable ramp speed | envelope sensitivity
Global tone control for the overall color of your modulation
Mix control for dialing in various modulation intensities
TRUE BYPASS (electromechanical relay switching)
Stereo input and output
Favorite footswitch for saving your favorite setting
Powered with a standard 9V center negative DC supply. Compatible with all major DC supply brands. Current consumption 200mA – (250mA recommended supply)
Premium analog front end and output section
No-nonsense user interface
Strong and lightweight blue anodized aluminum chassis
Crafted with love in the USA

9V power supply included.

Lark Guitars Difference: Lark Guitars takes great pride in making sure your shipment will arrive timely, correctly and as hassle free as possible. With the massive shift to more remote ordering of guitars and instruments, this process can be exasperating at times. It is our goal to minimize any of these feelings, making your transaction from purchase to playing as joyfully possible. For more info regarding our shipping methods, please visit here.

International Shipping:

We ship all over the world, please contact us with any questions you may have or to receive a detailed shipping quote! More info here.

Strymon Orbit dBucket Flanger - Available at Lark Guitars

Strymon Orbit dBucket Flanger

$ 299.00

Product Description

Hand crafted dBucket algorithm for highly accurate reproduction of every stage of an analog bucket brigade chip. Built on the dBucket building blocks developed for our Brigadier delay.
Super low noise, high performance A/D and D/A converters w/ 110dB signal to noise
High performance DSP stuffed into a compact form factor
3 LFO types (log, lin, through zero)
3 Feedback types (positive, negative, pos/neg)
TRUE BYPASS (electromechanical relay switching)
Stereo output
Expression pedal input with selectable control over any knob parameter
Favorite footswitch for saving your favorite setting
Powered with a standard 9V center negative DC supply. Compatible with all major DC supply brands. Current consumption 200mA – (250mA recommended supply)
Premium analog front end and output section
No-nonsense user interface
Strong and lightweight purple anodized aluminum chassis
Crafted with love in the USA

9V power supply included.

Lark Guitars Difference: Lark Guitars takes great pride in making sure your shipment will arrive timely, correctly and as hassle free as possible. With the massive shift to more remote ordering of guitars and instruments, this process can be exasperating at times. It is our goal to minimize any of these feelings, making your transaction from purchase to playing as joyfully possible. For more info regarding our shipping methods, please visit here.

International Shipping:

We ship all over the world, please contact us with any questions you may have or to receive a detailed shipping quote! More info here.

Strymon Flint Tremolo & Reverb

$ 299.00

NOW IN STOCK! To purchase, please contact us:

info@larkguitars.com
210-384-4303

Product Description

A Perfect Gentleman — From a Classic Era.

The magical combination of tremolo and reverb is the earliest example of a perfect guitar effects marriage. First pioneered within historic amplifiers of the 1960s, this harmonious coexistence has made it's way onto countless records and performances—from early surf, swampy bayou blues, spaghetti westerns, film noir soundtracks, to modern day indie rock. There are certain things in life that just belong together—the blend of tremolo and reverb create the perfect pair.

Given this storied history, there was no doubt that we wanted to develop a studio-class effects pedal that delivers this classic combination. We carefully studied our favorite classic tremolo and reverb circuits, examined the sonic complexities, and faithfully accounted for every detail in our hand-crafted algorithms. Flint harnesses the complete power of a SHARC DSP to authentically exhibit these details.

Flint gives you the soothing, pulsating, and hypnotic effects that were pioneered in vintage amplifier tremolo circuits, along with three classic and completely unique reverb algorithms. You get the sonically complex '61 Harmonic Tremolo, the swampy and sultry '63 Power Tube Tremolo, and the sharp and balanced '65 Photocell Tremolo. You also get the classic '60s Spring Tank Reverb, the inventive '70s Electronic Plate Reverb, and the nostalgic '80s Hall Rack Reverb.

With eight parameters to tweak, you get extensive control over the tremolo and reverb characteristics. Go from splashy, pulsing twang, to throbbing, swampy blues, all the way to ambient, trembling, and serene reverberated pads. Couple that with true bypass, and a high quality analog front end and output section, and you have yourself the history of tremolo and reverb in a pedal-board friendly format.

Sound Design

Three hand crafted tremolo algorithms faithfully deliver classic tremolo experiences:
'61 Harmonic Tremolo, '63 Power Tube Tremolo, '65 Photocell Tremolo
Three distinct reverb algorithms:
'60s Spring Tank Reverb, '70s Electronic Reverb, '80s Hall Rack Reverb
Two tremolo adjustment and tone shaping knobs: Intensity, Speed
Three reverb adjustment and tone shaping knobs: Decay, Color, Mix
Four "hidden" knobs for extensive tone tweaking:
Tremolo Boost/Cut, Reverb Boost/Cut, Effect Order, Tap Subdivision

Ins, Outs & Switches

High impedance mono input (internal jumper enables selectable TRS stereo input)
Stereo output
Tremolo Bypass and Reverb Bypass footswitches
Expression pedal input allows the connection of either an expression pedal (for selectable control over any knob parameter), external tap pedal (for remote tap tremolo), or Favorite switch (to save a Favorite preset)

Audio Quality

Super low noise, high performance 24-bit 96kHz A/D and D/A converters
115db typical signal to noise
+8dBu maximum input level easily handles instrument and line signals
20Hz to 20kHz frequency response
Premium analog front end and output section
Analog dry path (when Reverb only is engaged)
Super high performance DSP in a compact form factor
32-bit floating point processing

More

True Bypass (electromechanical relay switching)
Selectable "trails" mode with high quality Analog Buffered Bypass
Adjustable +/- 3dB boost or cut when effect is engaged
Powered with a standard 9V center negative DC supply, 250mA minimum
Strong and lightweight black anodized aluminum chassis
Crafted with love in the USA

Lark Guitars Difference: Lark Guitars takes great pride in making sure your shipment will arrive timely, correctly and as hassle free as possible. With the massive shift to more remote ordering of guitars and instruments, this process can be exasperating at times. It is our goal to minimize any of these feelings, making your transaction from purchase to playing as joyfully possible. For more info regarding our shipping methods, please visit here.

International Shipping:

We ship all over the world, please contact us with any questions you may have or to receive a detailed shipping quote! More info here.

Strymon DIG Dual Digital Delay

$ 299.00

Two simultaneous, integrated delays, with unique digital rack delay voicings
Five dual delay adjustment and tone shaping knobs: Time, Time 2, Mix, Mix 2, Repeats
One modern and two classic digital delay voicings: 24/96, adm, 12 bit
Five rhythmic subdivisions: Triplet, Eighth, Golden Ratio, Dotted Eighth, Dotted Quarter
Three choices for delay line modulation: Off, Light, Deep
Five “hidden” knobs for deep dual delay control: Delay 1 Subdivision, Sync/Free Mode, Filter, Config, Delay 2 Repeats
Selectable Free Mode disables subdivisions and synchronization
Press and hold Circular Repeats effect
20ms - 1.6s delay range (40ms - 3.2s with Half Note Delay 1 Subdivision)

High impedance mono input, with selectable TRS stereo input
Stereo output
Three signal routing configurations: Series, Parallel, Ping Pong
Tap tempo and Bypass footswitches
Expression pedal input allows the connection of either an expression pedal (for selectable control over any knob parameter), external tap pedal (for remote control of tempo), or Favorite switch (to save a Favorite preset)

Super low noise, high performance 24-bit 96kHz A/D and D/A converters
115db typical signal to noise
Analog dry path for a zero latency dry signal that is never converted to digital
+8dBu maximum input level easily handles instrument and line signals
20Hz to 20kHz frequency response
Premium analog front end and output section
Super high performance SHARC DSP in a compact form factor
32-bit floating point processing

True Bypass (electromechanical relay switching)
Selectable Trails Mode with high quality, transparent Analog Buffered Bypass mode
9V center negative DC power supply included, 250mA current draw
Strong and lightweight anodized carnation pink chassis
Designed and built in the USA

Lark Guitars Difference: Lark Guitars takes great pride in making sure your shipment will arrive timely, correctly and as hassle free as possible. With the massive shift to more remote ordering of guitars and instruments, this process can be exasperating at times. It is our goal to minimize any of these feelings, making your transaction from purchase to playing as joyfully possible. For more info regarding our shipping methods, please visit here.

International Shipping:

We ship all over the world, please contact us with any questions you may have or to receive a detailed shipping quote! More info here.

Strymon El Capistan dTape Echo - Available at Lark Guitars

Strymon El Capistan dTape Echo

$ 299.00

NOW IN STOCK! To purchase, please contact us:

info@larkguitars.com
210-384-4303

Product Description

Magnetic Monster.

When we decided to develop an effects pedal that delivers the sound and feel of our favorite tape echo machines, we knew we must relentlessly study and faithfully recreate every last nuance. We spent months in the Strymon sound design labs with an intense focus on capturing the warm, saturated, distinctive qualities of tape echo machines. The result is our hand crafted dTape™ technology. Utilizing a ridiculously powerful SHARC DSP, every drop of processing power is harnessed.

El Capistan provides three different tape machine types in one, each with three unique modes. With ten parameters to tweak, you get extensive control over tape quality, machine health and tone shaping. Go from the sound of a pristine, studio-quality tape machine to the heavily fluctuating sound of a machine in need of service. Get the full bodied sound of fresh tape all the way to the gnarled qualities of worn out tape. Because it's DSP driven, you get a range of tape experiences unattainable with a traditional tape machine. All of this without the headaches of tape machine maintenance and repair!

Sound Design

Hand crafted dTape algorithms deliver meticulous and nuanced recreations of tape echo systems.
Three tape machines in one: Fixed (one fixed playback head), Multi (multiple playback heads), and Single (sliding record head)
Each tape machine has three modes for extremely flexible echo options
Five tape adjustment and tone shaping knobs: Time, Mix, Tape Age, Repeats, Wow & Flutter
Five "hidden" knobs for extensive tone tweaking: Tape Crinkle, Tape Bias, Low End Contour, Spring Reverb, +/- 3dB Boost/Cut
Sound on Sound mode with instant tape splice and bulk erase. A built-in tape-style looper!

Ins, Outs, Switches

Stereo output
High impedance mono input (internal jumper enables selectable TRS stereo input) Please read this FAQ for more info on the TRS input.
Expression pedal input with selectable control over any knob parameter
Connect our optional Favorite switch to save a favorite preset
Tap Tempo and Bypass footswitches

Audio Quality

Ultra low noise, high performance 24-bit 96kHz A/D and D/A converters
115dB typical signal to noise
Analog dry path for a zero latency dry signal that is never converted to digital
Premium analog front end and output section
Super high performance DSP in a compact form factor

More

True Bypass (electromechanical relay switching)
Selectable "trails" mode with high quality Analog Buffered Bypass
Press and hold Tap for instant infinite repeats
Powered with a standard 9V center negative DC supply. 250mA minimum
Strong and lightweight gunmetal gray anodized aluminum chassis
Crafted with love in the USA

9V power supply included.

Lark Guitars Difference: Lark Guitars takes great pride in making sure your shipment will arrive timely, correctly and as hassle free as possible. With the massive shift to more remote ordering of guitars and instruments, this process can be exasperating at times. It is our goal to minimize any of these feelings, making your transaction from purchase to playing as joyfully possible. For more info regarding our shipping methods, please visit here.

International Shipping:

We ship all over the world, please contact us with any questions you may have or to receive a detailed shipping quote! More info here.

Strymon Compadre Dual Voice Compressor & Boost

Strymon Compadre Dual Voice Compressor & Boost

$ 299.00

Start your signal chain with the best possible version of your guitar tone. Treat your guitar signal to true studio quality analog compression with two distinct voices for smooth transparency or vintage squeeze. Hit the Boost switch to add clean boost or soft-clipped dirty boost, with the EQ curve of your choice. Mix in some dry signal for natural attack even with extreme compression settings. Feel the perfectly tailored dynamic response, feeding your amp and effects just what they need to sound their best.

YOUR EVERYTHING UPGRADE.

From pickups, tubes, capacitors, to speaker cabinets—the aspects of a rig that can be upgraded or changed are nearly endless. Plug in Compadre and you may find you already have everything you need for the tone you’ve been seeking.

Bring out your amp’s character in ways you never thought possible. Compadre’s Class A JFET input circuit, studio quality analog compression, and musically voiced analog boost circuits all work together to make your amp sound like it was just modified by a world-class boutique amp designer.

SUPER FLEXIBLE, SUPER EASY.

Compadre gives you everything you need to shape your front end tone, and nothing to slow you down. Auto makeup gain and auto threshold mean that all you have to do is turn up the Compression knob to dial in the desired amount. Compadre’s wide variety of tone shaping features are all designed to easily sound great across a wide variety of settings.

TWO DISTINCT ANALOG COMPRESSION CIRCUITS.

Choose between two compression circuits, each with its own unique character. Studio mode gives you the smooth, beautifully transparent compression typically found in the best vintage studio rack units. For a harder compression effect typical of classic guitar pedals, Compadre’s Squeeze mode is designed to deliver heavy compression with maximum sustain.

BOOST THE SWEET SPOT, CLEAN OR DIRTY.

Compadre gives you two distinct analog boost circuits: a clean boost, and a dirty boost that introduces soft clipping, characteristic of an overdrive pedal. The selectable boost EQ ensures the perfect compliment to any guitar and amp combination. Add sparkle and shine with a treble boost, fatten your tone with the midrange boost, or level up the full frequency range with flat mode.

EXTENDED CONTROL.

Connect an expression pedal to add premium VCA-based volume control. Add an optional MiniSwitch or MultiSwitch Plus to store and recall your favorite settings. Integrate Compadre into a MIDI pedalboard using our MIDI EXP Cable and access up to 300 preset locations.

Lark Guitars Difference: Lark Guitars takes great pride in making sure your shipment will arrive timely, correctly and as hassle free as possible. With the massive shift to more remote ordering of guitars and instruments, this process can be exasperating at times. It is our goal to minimize any of these feelings, making your transaction from purchase to playing as joyfully possible. For more info regarding our shipping methods, please visit here.

International Shipping:

We ship all over the world, please contact us with any questions you may have or to receive a detailed shipping quote! More info here.

Strymon Sunset Dual Overdrive

$ 299.00

CLASSIC OVERDRIVE SOUND, X2.

Sunset gives you the best of the best classic overdrive circuits, custom voiced for instantly gratifying control over a huge range of sought-after tones. We studied six circuit types found in many truly timeless and iconic overdrive and boost pedals, and put our takes on all six of them into a single two-channel unit.

TWO PEDALS AT ONCE.

Sunset is really two customizable overdrive pedals, independently selectable and flexibly routable, designed and voiced for complementary tones when stacked. Six distinct circuits each feel and react differently in your hands, two at once, all in one convenient package. Push your amp any way you want, from transparent “more amp” to heavy saturated fuzz, and all the best places in between.

HOLY GRAIL TONE, MINUS THE QUEST.

We are all familiar with the endless search for the ultimate overdrive pedal and the perfect tone. We did the critical listening and custom voicing to design each side of Sunset with just one tone knob, so you can quickly dial in the sound you want. The knob ranges for each circuit type are custom calibrated to provide maximal usable control. We applied the same design philosophy and care to the stacking options, ensuring each combination interacts optimally and sounds great, so a huge range of classic overdrive tones are instantly achievable.

OPTIMIZED STACKING.

Since the time when overdrives were created to simply push an amp in order to achieve an overdriven sound even at sane volume levels, players have evolved to want more layered, multistage tonalities. Stacking gives you more flexibility and tone range on the floor. You can find an overdrive that sounds good on its own, then run it through a second drive to add new dimensions to your tone. Sunset allows you to use any of its six overdrive circuits on their own, or route the Channel A drive circuit through Channel B, or Channel B through Channel A, or use two circuits in parallel. Routing options have been chosen deliberately to present the best-sounding combinations of drive circuits. Sunset eliminates the guesswork.

DIGITAL OR ANALOG? WE CHOSE BOTH.

Sunset’s input features an ultra low noise, discrete, class-A JFET circuit providing up to 20dB of pure analog gain. With our hybrid approach you get the best of both analog and digital worlds: The JFET stage provides exceptional touch sensitivity and dynamic interaction with your guitar, while the incredibly powerful SHARC DSP facilitates the great level of detailed complexity and responsiveness you’ll want to hear.

Lark Guitars Difference: Lark Guitars takes great pride in making sure your shipment will arrive timely, correctly and as hassle free as possible. With the massive shift to more remote ordering of guitars and instruments, this process can be exasperating at times. It is our goal to minimize any of these feelings, making your transaction from purchase to playing as joyfully possible. For more info regarding our shipping methods, please visit here.

International Shipping:

We ship all over the world, please contact us with any questions you may have or to receive a detailed shipping quote! More info here.

Strymon blueSky Reverberator

$ 299.00

NOW IN STOCK! To purchase, please contact us:

info@larkguitars.com
210-384-4303

Product Description

Lush, Majestic Reverbs. Insane DSP Power.

The philosophy behind our blueSky Reverberator is simple—take a ridiculously powerful SHARC DSP and dedicate it to doing one thing only: producing the most lush, majestic and stunning reverbs ever. Many hours and sleepless nights in the Strymon sound design labs were devoted to developing the complex reverb algorithms found inside blueSky. We squeezed every last drop of processing power available.

Whether you're a classic spring reverb fan or a studio rack aficionado, you'll find your mojo here. blueSky provides three different reverb types, each with three modes, for a total of nine completely unique reverb experiences. blueSky even delivers an extremely versatile plate reverb, a rarity for a stompbox pedal. A full pre-delay and damping section provide deep reverb tone shaping. Add the mod and shimmer modes and you're in store for unending reverb bliss. Couple that with 24-bit 96kHz converters and 115dB typical signal to noise, blueSky is equally at home on top of a studio console as it is in front of a tube amp.

Hand crafted, computationally intense Plate, Room and Spring algorithms
Normal, Mod and Shimmer modes per algorithm for extremely versatile reverb options
High Damp and Low Damp controls for über-flexible reverb tone shaping
Mod mode for a beautifully modulated spring, room or plate reverb
Shimmer mode for infinite pitch effects "in the tank"
Dedicated Pre-Delay control to fine tune reflection times

Stereo input and output
Favorite footswitch to save a favorite sound
True Bypass (electromechanical relay switching)
Selectable "trails" mode with high quality Analog Buffered Bypass
Adjustable +/- 3dB boost or cut when the effect is engaged
Powered with a standard 9V center negative DC supply. 250mA minimum
Strong and lightweight sky blue anodized aluminum chassis
Crafted with love in the USA

Ultra low noise, high performance 24-bit 96kHz A/D and D/A converters
115dB typical signal to noise
Analog dry path for a zero latency dry signal that is never converted to digital
20Hz to 20kHz frequency response
+8dBu maximum input level easily handles instrument and line signals
Premium analog front end and output section
Super high performance DSP in a compact form factor

9V power supply included.

Lark Guitars Difference: Lark Guitars takes great pride in making sure your shipment will arrive timely, correctly and as hassle free as possible. With the massive shift to more remote ordering of guitars and instruments, this process can be exasperating at times. It is our goal to minimize any of these feelings, making your transaction from purchase to playing as joyfully possible. For more info regarding our shipping methods, please visit here.

International Shipping:

We ship all over the world, please contact us with any questions you may have or to receive a detailed shipping quote! More info here.

Strymon OB.1 Optical Compressor & Clean Boost w/ Bass Guitar Modification

Strymon OB.1 Optical Compressor & Clean Boost w/ Bass Guitar Modification

$ 299.00

NOW IN STOCK! To purchase, please contact us:

info@larkguitars.com
210-384-4303

Product Description

This Strymon OB.1 has the Strymon Bass Guitar Modification

Your New Main Squeeze.

Everything you love about studio optical compressors … right at your feet. From beautifully subtle and transparent compression to vintage squash
Integrated foot-switchable Clean, Treble and Mid boost. Push the front end of your tube amp to the edge with the OB.1 boost. Internal DIP switches allow selection of the Treble and Mid boost frequencies
TRUE BYPASS
The best choice for a “first in your signal chain” pedal. Everything sounds better with an OB.1
Saves space on your pedal board by combining your compressor, clean boost, and treble booster. Leaves room for more pedals ;)
Powered with a 9V battery or DC supply. Compatible with all major DC supply brands
Premium analog signal path and components throughout
Gorgeous, strong and lightweight Orange anodized aluminum chassis
Crafted with love in the USA

9V battery included.

Lark Guitars Difference: Lark Guitars takes great pride in making sure your shipment will arrive timely, correctly and as hassle free as possible. With the massive shift to more remote ordering of guitars and instruments, this process can be exasperating at times. It is our goal to minimize any of these feelings, making your transaction from purchase to playing as joyfully possible. For more info regarding our shipping methods, please visit here.

International Shipping:

We ship all over the world, please contact us with any questions you may have or to receive a detailed shipping quote! More info here.

Strymon Riverside Multistage Drive

$ 299.00

A NEW WORLD OF DRIVE.

Riverside is the culmination of a thorough analysis of numerous analog and vacuum tube circuits. Our goal? To deliver a new world of harmonically rich, incredibly versatile, tube-inspired drive sounds. We didn’t want to build just another distortion or overdrive. We knew we must examine what has been done, and bring a new approach to the world of drive sounds.

DISCOVER YOUR AMP’S POTENTIAL.

Riverside’s cascading gain stages create harmonically rich tones that are immensely musical and natural—from silky clean overdrive to colossal distortion, and all points between. Our analog JFET front-end ensures that Riverside responds to your guitar with uncompromised dynamics and feel. The precision crafted DSP generates dynamic complexity and pleasing harmonics at every stage, letting your amp shine at any gain level. Riverside takes your amp to places you never knew it could go.

INFINITE SWEET SPOT.

Riverside’s continuously variable circuit tuning dynamically tweaks multiple parameters under the hood so that the sweet spot follows you at any gain setting. As you turn the Drive knob, Riverside makes continuous adjustments, tuning the circuit for optimum tone. This results in an incredibly versatile drive pedal that is equally capable of providing sparking cleans, mild overdrives, high-gain leads, and heavy saturated distortions.

FLEXIBILITY TO ADAPT TO ANY AMP.

Your amp choice has a large influence on the sound of any drive pedal connected to it. Riverside’s musical 3-band EQ, with independent Bass, Middle and Treble knobs, is designed to complement your amp’s tone with the flexibility needed to dial in your sound effectively and efficiently. The three-position Presence switch tailors the highest frequencies, allowing Riverside to integrate perfectly with any amp or setup, no matter how dark or bright.

DIGITAL OR ANALOG? WE CHOSE BOTH.

The first stage of Riverside’s custom multistage drive topology is an all-analog, ultra low noise, discrete, class-A JFET circuit. This gain stage is digitally controlled to maximize headroom while adding as much as 20dB of pure analog gain, with tight integration to the subsequent DSP gain stages.

With our hybrid approach you get the best of both analog and digital worlds: The JFET stage provides exceptional touch sensitivity and dynamic interaction with your guitar, while the incredibly powerful SHARC DSP facilitates the great level of detailed complexity and responsiveness you’ll want to hear.

SPECS

Sound Design

Custom cascading multistage distortion topology provides a wide range of tube-inspired drive tones
Digitally controlled analog class A JFET input gain stage maximizes headroom while adding up to 20dB of pure analog gain
Precision crafted DSP gain stages provide detailed complexity and responsiveness
Low gain channel for smooth classic overdrive
High gain channel for modern saturated distortion
3-band EQ with independent Bass, Middle and Treble controls
Selectable post-analog gain mid-band EQ push
Presence switch to tailor the sound for use with all amplifiers from dark to bright
Optional variable-threshold noise reduction helps tame noisy guitar pickups

Ins, Outs, Switches

High impedance mono input
Mono output
Favorite footswitch to save a favorite setting
Expression pedal input allows the connection an expression pedal for simultaneous morphing control over multiple parameters (Expression mode), or logarithmic taper for smooth volume control (Volume mode)
Boost pedal input allows connection of an external footswitch for up to +6dB of analog boost, or to toggle the Favorite preset on other Strymon pedals (Favorite Out mode)

Audio Quality

Ultra low noise, high performance 24-bit 96kHz A/D and D/A converters provide uncompromising audio quality
Premium analog front end and output section
Super high performance SHARC DSP in a compact form factor
32-bit floating point processing

More

True Bypass (electromechanical relay switching)
Strong and lightweight anodized gold aluminum chassis
9V DC power supply included
Power requirements: maximum 9 volts DC center-negative, with a minimum of 250mA of current
Dimensions:
- 4.5″ deep x 4″ wide x 1.75″ tall
- 11.4 cm deep x 10.2 cm wide x 4.4 cm tall
Designed and built in the USA

Lark Guitars Difference: Lark Guitars takes great pride in making sure your shipment will arrive timely, correctly and as hassle free as possible. With the massive shift to more remote ordering of guitars and instruments, this process can be exasperating at times. It is our goal to minimize any of these feelings, making your transaction from purchase to playing as joyfully possible. For more info regarding our shipping methods, please visit here.

International Shipping:

We ship all over the world, please contact us with any questions you may have or to receive a detailed shipping quote! More info here.

Strymon Lex Rotary

$ 299.00

Product Description

When we decided to create a studio-class pedal that faithfully recreates the classic, unmistakable sound of the most sought-after rotating speaker system, we prepared to study every nuance and finest detail. The Strymon sound design labs have been filled with those signature, swirling, three-dimensional sounds, as we painstakingly analyzed and recreated the physics and mechanics behind these systems.

Lex provides you with a complete, accurately reproduced rotary system: the low-frequency bass rotor, the rotating treble horn, the tube-driven amplifier, finely tuned microphone placement, and all the complex sonic interactions between these elements. Utilizing a ridiculously powerful SHARC DSP, every drop of processing power is harnessed to authentically represent these details.

You get eight parameters to tweak, allowing extensive control over the tonality and mechanics of the rotating speaker system. You can manipulate each element, from rotor speed, horn level, acceleration time, microphone distance, tube drive and saturation, and volume level. Go from a maelstrom of dramatic, up-close, sweeping and swirling sounds, all the way to mellow, tranquil and calming undulations. All of this without a giant cabinet, microphone setup, and costly motor maintenance.

Sound Design

Hand crafted rotary algorithms faithfully deliver the signature, three-dimensional rotating speaker experience
Extensive control over rotating speaker mechanics and configuration
Four rotary adjustment and tone shaping knobs:
Fast Rotor Speed, Preamp Drive, Mic Distance, Horn Level.
Four “hidden” knobs for extensive tone tweaking:
Slow Rotor Speed, Cab Direction, Acceleration Time, +/- 6dB Boost/Cut.
Instantly alternate between a fast and slow rotor speed with the Fast/Slow footswitch
Transparent cabinet technology allows for an optimal experience in front of guitar amplifiers and full range systems

Ins, Outs, Switches

Stereo output
High impedance mono input (internal jumper enables selectable TRS stereo input) Please read this FAQ for more info on the TRS input.
Expression pedal input with selectable control over any knob parameter
Connect our optional Favorite switch to save a favorite preset
Fast/Slow and Bypass footswitches
Press and hold Fast/Slow footswitch for Rotary Brake
Selectable Bi-Amp mode splits bass rotor and treble horn signals to separate outputs

Audio Quality

Ultra low noise, high performance 24-bit 96kHz A/D and D/A converters
110dB typical signal to noise
Premium analog front end and output section
Super high performance DSP in a compact form factor
32-bit floating point processing

More

True Bypass (electromechanical relay switching)
Powered with a standard 9V center negative DC supply, 250mA minimum (included)
Strong and lightweight mahogany anodized aluminum chassis
Crafted with love in the USA

Lark Guitars Difference: Lark Guitars takes great pride in making sure your shipment will arrive timely, correctly and as hassle free as possible. With the massive shift to more remote ordering of guitars and instruments, this process can be exasperating at times. It is our goal to minimize any of these feelings, making your transaction from purchase to playing as joyfully possible. For more info regarding our shipping methods, please visit here.

International Shipping:

We ship all over the world, please contact us with any questions you may have or to receive a detailed shipping quote! More info here.

Strymon Brigadier dBucket Delay

$ 299.00

NOW IN STOCK! To purchase, please contact us:

info@larkguitars.com
210-384-4303

Product Description

Destroying the Analog / Digital Divide.

In setting out to design Brigadier, we decided to take a super-powerful SHARC DSP and dedicate all of it’s horsepower to doing one thing and one thing only—delivering the best analog bucket brigade sound ever. We’ve utilized every last drop of DSP power, allowing Brigadier to deliver every minute detail and nuance that makes an analog delay special. Our hand crafted, processor-intense dBucket algorithm delivers all of the sonic complexities of analog bucket delays. No stone has been left unturned.

Brigadier gives you all of the tone and none of the noise of regular old bucket brigade chips, unless of course you choose to add it back with our exclusive Bucket Loss control! Go from warm and clean repeats all the way to noisy, saturated delays. Couple that with dedicated modulation and filter controls, tap tempo, and assignable expression pedal input, and you have yourself a versatile delay powerhouse.

Sound Design

Hand crafted dBucket algorithm for highly accurate reproduction of every stage of an analog bucket brigade chip and the associated clock driver circuitry
Bucket Loss control to vary the amount of loss that occurs at each stage of the dBucket
3 delay time modes: Short, Medium and Long
Tap Tempo modes for quarter, dotted eighth, and eighth note triplets
Filter control for adjusting the tone of the delay repeats
Dedicated modulation control

Ins, Outs & Switches

Stereo output
High impedance mono input (internal jumper enables selectable TRS stereo input) Please read this FAQ for more info on the TRS input.
Expression pedal input with selectable control over any knob parameter
Connect our optional Favorite switch to save a favorite preset
Tap Tempo and Bypass footswitches

Audio Quality

Ultra low noise, high performance 24-bit 96kHz A/D and D/A converters
115dB typical signal to noise
Analog dry path for a zero latency dry signal that is never converted to digital
20Hz to 20kHz frequency response
+8dBu maximum input level easily handles instrument and line signals
Premium analog front end and output section
Super high performance DSP in a compact form factor

More

True Bypass (electromechanical relay switching)
Selectable “trails” mode with high quality Analog Buffered Bypass
Press and hold Tap for infinite repeats
Adjustable +/- 3dB boost or cut when the effect is engaged
Powered with a standard 9V center negative DC supply. 250mA minimum
Strong and lightweight green anodized aluminum chassis
Crafted with love in the USA

Lark Guitars Difference: Lark Guitars takes great pride in making sure your shipment will arrive timely, correctly and as hassle free as possible. With the massive shift to more remote ordering of guitars and instruments, this process can be exasperating at times. It is our goal to minimize any of these feelings, making your transaction from purchase to playing as joyfully possible. For more info regarding our shipping methods, please visit here.

International Shipping:

We ship all over the world, please contact us with any questions you may have or to receive a detailed shipping quote! More info here.

Strymon Zuma - High Current DC Power Supply

Strymon Zuma - High Current DC Power Supply - Available at Lark Guitars

Strymon Zuma - High Current DC Power Supply

$ 249.00

Never worry about power again.

Zuma is the highest horsepower, most technologically advanced effects pedal power supply of its kind. Zuma offers nine high-current, individually isolated, ultra-low-noise outputs—each with its own dedicated regulator and custom transformer. Designed to meet the needs of today’s players, each output provides a staggering 500mA of current.

Zuma’s dual-stage topology, pre-regulated outputs, optically isolated feedback, and advanced multistage filtering result in a power supply that allows your pedals to achieve their highest possible dynamic range.

Zuma - Effects Pedal Power Supply - front view

Dual isolation.

Zuma’s all analog circuitry offers two stages of isolation, completely eliminating ground loop and AC line noise issues, allowing your pedals to sound like they were designed to sound.

World tour ready.

With automatic international power compatibility built-in, Zuma delivers an abundance of clean, rock-steady power to all your pedals, on any stage anywhere you play in the world.

Never run out of outputs.

Have a growing rig? Zuma is part of an expandable system. Add more outputs by connecting a Strymon Ojai (sold separately) with the 24V Out jack.

Lark Guitars Difference: Lark Guitars takes great pride in making sure your shipment will arrive timely, correctly and as hassle free as possible. With the massive shift to more remote ordering of guitars and instruments, this process can be exasperating at times. It is our goal to minimize any of these feelings, making your transaction from purchase to playing as joyfully possible. For more info regarding our shipping methods, please visit here.

International Shipping:

We ship all over the world, please contact us with any questions you may have or to receive a detailed shipping quote! More info here.

Strymon Zuma R300 Power Supply

$ 199.00

High Horsepower, Low Profile.

Zuma R300 is the highest horsepower, most technologically advanced low profile effects pedal power supply. You get clean, rock-steady power for your 9V, 12V and 18V effects pedals in a pedalboard friendly, expandable package, giving you room to grow. Zuma R300’s ultra-low profile design means that it can fit under just about any pedalboard.

Dual-stage topology, pre-regulated outputs, optically isolated feedback, and advanced multistage filtering result in a power supply that allows your pedals to achieve their highest possible dynamic range.

5 high-current, fully isolated outputs with center-negative polarity
- 4 dedicated 9V outputs (500mA)
- 1 adjustable output offers 9V (500mA), 12V (375mA), or 18V (250mA) DC options
500mA per 9V output powers nearly any pedal
Delivers a maximum of 36W
5 pedal cables included (5.5mm x 2.1mm barrel connectors, right angle to right angle, 18″ length)
IEC cable included
24V Thru jack allows connection to Strymon Ojai or Ojai R30 (sold separately)

Dual isolation.

Zuma R300’s all analog circuitry offers two stages of isolation, completely eliminating ground loop and AC line noise issues, allowing your pedals to sound like they were designed to sound.

Ultra-Low Profile.

Zuma R300’s ultra-low profile design means that it can fit under just about any pedalboard. With built in threaded hardware, mounting to your board is simple.

Zuma R300 Dimensions: 7.25″ x 3.5″ x 1.18″ (184mm x 88mm x 30mm)

Zuma R300 Weight 0.9 lbs. (400g)

Never run out of outputs.

Have a growing rig? Zuma R300 is part of an expandable system. Add more outputs by connecting a Strymon Ojai or Ojai R30 (sold separately) with the 24V Out jack.

Lark Guitars Difference: Lark Guitars takes great pride in making sure your shipment will arrive timely, correctly and as hassle free as possible. With the massive shift to more remote ordering of guitars and instruments, this process can be exasperating at times. It is our goal to minimize any of these feelings, making your transaction from purchase to playing as joyfully possible. For more info regarding our shipping methods, please visit here.

International Shipping:

We ship all over the world, please contact us with any questions you may have or to receive a detailed shipping quote! More info here.

Strymon Ojai R30 - Available at Lark Guitars

Strymon Ojai R30

$ 169.00

Power your pedals with Ojai R30—the highest horsepower, most technologically advanced effects pedal power supply of its size. You get clean, rock-steady power for your 9V, 12V and 18V effects pedals in a low profile, expandable package, giving you room to grow.

Ojai R30’s dual-stage topology, pre-regulated outputs, optically isolated feedback, and advanced multistage filtering allow your pedals to achieve their highest possible dynamic range.

5 high-current, fully isolated 9V outputs with center-negative polarity
- 3 dedicated 9V outputs (500mA)
- 2 adjustable outputs offer 9V (500mA), 12V (375mA), or 18V (250mA) DC options
500mA per output powers nearly any pedal
5 pedal cables included (5.5mm x 2.1mm barrel connectors, right angle to right angle, 18″ length)
24V power adapter (PS-124), EIAJ-05 power adapter cable, and IEC cable included
24V Thru jack allows connection to additional Strymon Ojai (sold separately)

Lark Guitars Difference: Lark Guitars takes great pride in making sure your shipment will arrive timely, correctly and as hassle free as possible. With the massive shift to more remote ordering of guitars and instruments, this process can be exasperating at times. It is our goal to minimize any of these feelings, making your transaction from purchase to playing as joyfully possible. For more info regarding our shipping methods, please visit here.

International Shipping:

We ship all over the world, please contact us with any questions you may have or to receive a detailed shipping quote! More info here.

Strymon Ojai R30 - Expansion Pack

$ 149.00

5 high-current, fully isolated 9V outputs with center-negative polarity
- 3 dedicated 9V outputs (500mA)
- 2 adjustable outputs offer 9V (500mA), 12V (375mA), or 18V (250mA) DC options
5 pedal cables included (5.5mm x 2.1mm barrel connectors, right angle to right angle, 18″ length)
EIAJ-05 power adapter cable included (18″ long, to connect Ojai to PS-124, Zuma, or Zuma R300 power supply)
24V Thru jack allows connection to additional Strymon Ojai (sold separately)
5 individual custom transformers (one per channel) deliver clean, consistent power
Worldwide power compatibility ensures no-hassle international touring
Energy efficient, compact design
Lightweight and rugged anodized midnight blue aluminum chassis
Ultra low profile design fits under nearly any pedalboard
Designed and built in the USA

Lark Guitars Difference: Lark Guitars takes great pride in making sure your shipment will arrive timely, correctly and as hassle free as possible. With the massive shift to more remote ordering of guitars and instruments, this process can be exasperating at times. It is our goal to minimize any of these feelings, making your transaction from purchase to playing as joyfully possible. For more info regarding our shipping methods, please visit here.

International Shipping:

We ship all over the world, please contact us with any questions you may have or to receive a detailed shipping quote! More info here.

Strymon Ojai - High Current DC Power Supply

Strymon Ojai - High Current DC Power Supply - Available at Lark Guitars

Strymon Ojai - High Current DC Power Supply

$ 149.00

Huge horsepower, small size.

Power your pedals with Ojai—the highest horsepower, most technologically advanced effects pedal power supply of its size. Ojai delivers clean, rock-steady power to your effects pedals in a lightweight and expandable package, giving you flexibility and room to grow.

You get five high-current, individually isolated, ultra-low-noise outputs—each with its own dedicated regulator and custom transformer. Each output provides a massive 500mA of current.

Ojai’s dual-stage topology, pre-regulated outputs, optically isolated feedback, and advanced multistage filtering result in a power supply that allows your pedals to achieve their highest possible dynamic range.

Dual isolation.

Ojai’s all analog circuitry offers two stages of isolation, completely eliminating ground loop and AC line noise issues, allowing your pedals to sound like they were designed to sound.

World tour ready.

With automatic international power compatibility built-in, Ojai delivers clean, reliable power to all your pedals, on any stage anywhere you play in the world.

Never run out of outputs.

Have a growing rig? Ojai is part of an expandable system. Gain more outputs by connecting additional Ojai units to the 24V Thru jack. Or use Ojai to add five more outputs to our Zuma power supply (sold separately).

Lark Guitars Difference: Lark Guitars takes great pride in making sure your shipment will arrive timely, correctly and as hassle free as possible. With the massive shift to more remote ordering of guitars and instruments, this process can be exasperating at times. It is our goal to minimize any of these feelings, making your transaction from purchase to playing as joyfully possible. For more info regarding our shipping methods, please visit here.

International Shipping:

We ship all over the world, please contact us with any questions you may have or to receive a detailed shipping quote! More info here.

Strymon Ojai - High Current DC Power Supply - Expansion Pack

Strymon Ojai - High Current DC Power Supply - Expansion Pack

$ 129.00

5 high-current, fully isolated 9V outputs with center-negative polarity
5 pedal cables included (5.5mm x 2.1mm barrel connectors, straight angle to right angle, 18″ length)
EIAJ-05 power adapter cable included (18″ long, to connect Ojai to PS-124, Zuma, or Zuma R300 power supply)
24V Thru jack allows connection to additional Strymon Ojai (sold separately)
5 individual custom transformers (one per channel) deliver clean, consistent power
Worldwide power compatibility ensures no-hassle international touring
Energy efficient, compact design
Lightweight and rugged anodized midnight blue aluminum chassis
Fits under nearly any pedalboard
Designed and built in the USA

Lark Guitars Difference: Lark Guitars takes great pride in making sure your shipment will arrive timely, correctly and as hassle free as possible. With the massive shift to more remote ordering of guitars and instruments, this process can be exasperating at times. It is our goal to minimize any of these feelings, making your transaction from purchase to playing as joyfully possible. For more info regarding our shipping methods, please visit here.

International Shipping:

We ship all over the world, please contact us with any questions you may have or to receive a detailed shipping quote! More info here.

Strymon Multi Switch Plus

$ 129.00

Multiple Control Modes.

MultiSwitch Plus can be configured in several different ways to extend floor control of compatible Strymon pedals. Depending on the selected mode and the pedals connected, you can recall presets, change banks, operate TimeLine’s looper, remotely tap tempos, and more.

Control up to Three Pedals.

Featuring three outputs, MultiSwitch Plus allows you to connect up to three compatible Strymon pedals using additional TRS cables (sold separately). Now you can engage presets on Sunset, Riverside, and Volante simultaneously. Or mix and match the footswitches to set up your own custom operation—such as controlling tap tempo on your Flint, Favorite on your El Capistan, and Boost on your Riverside.

Lark Guitars Difference: Lark Guitars takes great pride in making sure your shipment will arrive timely, correctly and as hassle free as possible. With the massive shift to more remote ordering of guitars and instruments, this process can be exasperating at times. It is our goal to minimize any of these feelings, making your transaction from purchase to playing as joyfully possible. For more info regarding our shipping methods, please visit here.

International Shipping:

We ship all over the world, please contact us with any questions you may have or to receive a detailed shipping quote! More info here.

Strymon MultiSwitch

$ 99.00

Product Description

PLEASE NOTE: Firmware update will be required on your TimeLine, BigSky, or Mobius to enable the new Expression Modes compatible with MultiSwitch. Visit strymon.net/update for information on how to update the firmware on your pedal. A USB to MIDI cable will be required. Thank you!

Extended control for TimeLine, BigSky, and Mobius.

Want to unlock the full functionality of TimeLine’s looper? Or discover a new means of exploring presets on TimeLine, BigSky, or Mobius? Connect MultiSwitch to your TimeLine, BigSky, or Mobius with the included 1/4" TRS cable and add a new dimension to your rig.

Specs

Latest TimeLine, BigSky, and Mobius firmware provides several Expression Modes compatible with MultiSwitch:
- Loop Control Mode (TimeLine only)
- Bank Mode
- Preset Mode
- Tap Mode
1/4" Right-Angle TRS cable included
No additional power supply required
Rugged gunmetal gray anodized aluminum chassis
Small and lightweight
Designed and built in the USA

Lark Guitars Difference: Lark Guitars takes great pride in making sure your shipment will arrive timely, correctly and as hassle free as possible. With the massive shift to more remote ordering of guitars and instruments, this process can be exasperating at times. It is our goal to minimize any of these feelings, making your transaction from purchase to playing as joyfully possible. For more info regarding our shipping methods, please visit here.

International Shipping:

We ship all over the world, please contact us with any questions you may have or to receive a detailed shipping quote! More info here.

Strymon MiniSwitch

$ 49.00

Product Description

Everyone has a Favorite.

Want to store a preset of your Favorite settings on your Brigadier, El Capista n, Lex, or Flint? Or remotely tap tempos for your TimeLine, Mobius or Flint? Add our tiny Tap Favorite switch and connect to your Strymon pedal with the included 1/4" TRS cable.

With the Favorite mode enabled, saving and recalling your Favorite preset is a snap. When you turn off your Favorite, it reverts back to the current knob states of your pedal. It’s like having two pedals ready to choose from.

When using Tap Tempo mode, you can place your TimeLine, Mobius, or Flint anywhere on your pedalboard and tap in your tempos remotely. Perfect for large rigs or boards with pedals fighting for real estate.

Features and Specs

Switch between Favorite mode and Tap Tempo mode via an internal jumper
Use Favorite mode to save and recall your favorite preset settings
- Favorite mode compatible with Brigadier, El Capistan, Lex, and Flint
- Favorite mode can also be used as an external speed switch with Lex
Use Tap Tempo mode for external tap tempo
- Tap Tempo mode compatible with TimeLine, Mobius, and Flint
1/4" TRS cable included
No additional power supply required
Rugged black anodized aluminum chassis
Super small and lightweight: measures 2" W x 2.25" D x 1.8" H
Designed and built in the USA

Lark Guitars Difference: Lark Guitars takes great pride in making sure your shipment will arrive timely, correctly and as hassle free as possible. With the massive shift to more remote ordering of guitars and instruments, this process can be exasperating at times. It is our goal to minimize any of these feelings, making your transaction from purchase to playing as joyfully possible. For more info regarding our shipping methods, please visit here.

International Shipping:

We ship all over the world, please contact us with any questions you may have or to receive a detailed shipping quote! More info here.

Strymon T-Shirt Smoke Gray - Medium

$ 19.99

Love Strymon Effects? Let everyone know by wearing their tee!

Hanes Nano-Tee - 100% Cotton

Lark Guitars Difference: Lark Guitars takes great pride in making sure your shipment will arrive timely, correctly and as hassle free as possible. With the massive shift to more remote ordering of guitars and instruments, this process can be exasperating at times. It is our goal to minimize any of these feelings, making your transaction from purchase to playing as joyfully possible. For more info regarding our shipping methods, please visit here.

International Shipping:

We ship all over the world, please contact us with any questions you may have or to receive a detailed shipping quote! More info here.

Strymon Zuma Mounting Kit - Available at Lark Guitars

Strymon Zuma Mounting Kit

$ 19.00

ZUMA MOUNTING KIT - BRACKETS FOR PEDALTRAIN PEDALBOARDS

These mounting brackets can be used to mount your Zumahigh-current DC power supply underneath your PedalTrain® pedalboard.

These brackets are compatible with:

Pedaltrain PT-3/Pro/Grande
Pedaltrain Novo 18/24/32
Pedaltrain Classic Jr/2/Pro
Pedaltrain Terra 42

Zuma mounting brackets are not compatible with older model Pedaltrain boards (PT-1, PT-2, PT-JR) with holes on the rear brace instead of an open pass through for the length of the board. For those boards, we recommend affixing Zuma to your board with Dual-Lock®.

Lark Guitars Difference: Lark Guitars takes great pride in making sure your shipment will arrive timely, correctly and as hassle free as possible. With the massive shift to more remote ordering of guitars and instruments, this process can be exasperating at times. It is our goal to minimize any of these feelings, making your transaction from purchase to playing as joyfully possible. For more info regarding our shipping methods, please visit here.

International Shipping:

We ship all over the world, please contact us with any questions you may have or to receive a detailed shipping quote! More info here.

Strymon DC Power Cable - 18" Right Angle to Right Angle (5 pack)

$ 19.00

2.1mm DC effects pedal power cables can be used with Zuma or Ojai to power most effects pedals available.

Connector #1: 2.1mm right angle
Connector #2: 2.1mm right angle
Polarity: standard (center negative)
Length: 18″ (46cm)

Lark Guitars Difference: Lark Guitars takes great pride in making sure your shipment will arrive timely, correctly and as hassle free as possible. With the massive shift to more remote ordering of guitars and instruments, this process can be exasperating at times. It is our goal to minimize any of these feelings, making your transaction from purchase to playing as joyfully possible. For more info regarding our shipping methods, please visit here.

International Shipping:

We ship all over the world, please contact us with any questions you may have or to receive a detailed shipping quote! More info here.

Strymon DC Power Cable - 36" Right Angle to Right Angle (5 pack)

$ 19.00

2.1mm DC effects pedal power cables can be used with Zuma or Ojai to power most effects pedals available.

Connector #1: 2.1mm right angle
Connector #2: 2.1mm right angle
Polarity: standard (center negative)
Length: 36″ (92cm)

Lark Guitars Difference: Lark Guitars takes great pride in making sure your shipment will arrive timely, correctly and as hassle free as possible. With the massive shift to more remote ordering of guitars and instruments, this process can be exasperating at times. It is our goal to minimize any of these feelings, making your transaction from purchase to playing as joyfully possible. For more info regarding our shipping methods, please visit here.

International Shipping:

We ship all over the world, please contact us with any questions you may have or to receive a detailed shipping quote! More info here.

Strymon DC Power Cable - 36" Straight to Right Angle (5 pack)

$ 19.00

2.1mm DC effects pedal power cables can be used with Zuma or Ojai to power most effects pedals available.

Connector #1: 2.1mm straight
Connector #2: 2.1mm right angle
Polarity: standard (center negative)
Length: 36″ (92cm)

Lark Guitars Difference: Lark Guitars takes great pride in making sure your shipment will arrive timely, correctly and as hassle free as possible. With the massive shift to more remote ordering of guitars and instruments, this process can be exasperating at times. It is our goal to minimize any of these feelings, making your transaction from purchase to playing as joyfully possible. For more info regarding our shipping methods, please visit here.

International Shipping:

We ship all over the world, please contact us with any questions you may have or to receive a detailed shipping quote! More info here.