Mesa Boogie Midi Matrix

ONE-BUTTON MIDI CONTROL OF CHANNELS, MODES AND FEATURES … EVEN MULTIPLE AMPS!

The Midi Matrix creates an amazing Hub for amp channel/mode and feature control as well as helping with your overall switching needs. Whether you need to build dense user presets with many devices online and responding to a single command, or just control your favorite Combo amp and an effect pedal or two, the Matrix can bring it all together under one button in a midi preset and finally end the musically distracting pedal-board dance for you. Fear not… You’re in Control!

• The MIDI Matrix™ Amp Controller replaces a MESA/Boogie amplifier’s multi-pin DIN/XLR or 1/4” foot-switch and automates foot-switchable functions via MIDI
• 3x10 DIP Switch Array and MESA Pre-Configurations eliminate the need for custom cables or dongles to control virtually every MESA/Boogie Amp ever made.
• Stores up to 250 Presets
• Accepts MIDI Program Change and Control Change Messages
• Compatible with all MIDI Foot-Controllers, MIDI capable Multi-Effect Pedals and Pedalboard-based MIDI Loop Switchers
• Illuminated, Instant Access On/Off Buttons
• Eight Switching Functions can be configured for Latching or Momentary, normally open or normally closed switching, and arranged into two linked groups
• Isolated Relays with gold plated, silver alloy, fully sealed contacts for maximum switching compatibility and reliability
• The 8-pin DIN and two ¼” TRS Switching Jacks are completely isolated, preventing ground loop hum and noise, and allow simultaneous control of up to three amplifiers or products
• Uses an amplifier’s existing multi-pin or 1/4” foot-switch cables, standard 1/4” cables, retail 1/4” adapter cables, or a MESA DIN7-to-XLR6 cable (for the Mark IV, Basis M-2000 and Quad Preamp w/ 6-Pin Foot-switch)
• User Data Dump & Load of all User Presets and Configuration Settings via MIDI (with CRC error detection)
• Software updates via MIDI
• Conveniently accepts 9V AC or DC via 2.1mm x 5.5mm barrel plug
• Provides phantom power to MIDI foot-controllers via 7-pin MIDI cable
• Rotatable keyed bottom Mounting Plate for Combo Amp or Effects Rack Installations

SPECIFICATIONS

• Minimum Operating Voltage: 9V DC
• Maximum Operating Voltage: 12V DC
• Maximum Current Draw: 250mA @ 9V DC
• Power Adapter (not included): WARNING!!! To avoid immediate damage and voiding the warranty, the External Power Supply MUST be 9V AC or DC, or maximum 12V DC, with a 2.1mm x 5.5mm Barrel Plug – Accepts Negative or Positive Center DC Polarity
• Dimensions (W x D x H): 5.23”x 4” x 1.59”
• Bottom Mounting Plate, Rotatable (W x D x H): 4.97” x 3.69” x 0.063”
• Weight: 0.9lbs (408.2g)